LG Appliance Repair in Queen Edith's

What does error bE mean on an LG dishwasher?

Error bE on an LG dishwasher indicates a button is stuck or being continuously pressed. Clean the control panel with a dry cloth, ensure no buttons are stuck, and restart the dishwasher. If the error persists, contact a specialist technician.

What does error Er IS mean on an LG fridge freezer?

Error Er IS on an LG fridge freezer indicates an ice maker sensor problem. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need inspection or replacement.

What does error PE mean on an LG washing machine?

Error PE on an LG washing machine indicates the water level pressure sensor has malfunctioned. Close the water tap, unplug the machine, wait several minutes, and restart. If the error persists, contact a specialist technician.

What does error PF mean on an LG dishwasher?

Error PF on an LG dishwasher indicates a power failure occurred during a cycle. Press any button to clear the code, then restart the cycle. If the error appears repeatedly without power interruptions, turn off the dishwasher for 1 minute then restart. If it persists, contact a specialist technician.

What does error dE2 mean on an LG washing machine?

Error dE2 on an LG washing machine indicates the door is closed but not locking properly. Unplug the machine for 10 seconds, then reconnect. Ensure the door closes firmly and nothing is obstructing the latch. If the error persists, the door lock mechanism may need inspection by a specialist technician.

What are the benefits of heat pump tumble dryers?

Heat pump tumble dryers recycle hot air rather than venting it, making them significantly more energy efficient than conventional dryers. They dry at lower temperatures, which is gentler on fabrics and helps clothes last longer. While drying cycles may take slightly longer, energy savings of up to 50% compared to vented dryers offset this.

How do I use rinse aid in my LG dishwasher?

Rinse aid improves drying performance and prevents water spots on glassware. Locate the rinse aid dispenser on the inside of the door, lift the flap and fill to the maximum line without overfilling. Close the lid until it clicks. The dispenser releases rinse aid automatically during the final rinse. Adjust the dispensing level if needed: higher levels improve drying in hard water areas, lower levels are suitable for soft water. Refill when the rinse aid indicator illuminates.

Why are my dishes not clean after a dishwasher cycle?

Poor cleaning results are often caused by blocked filters, incorrect loading or clogged spray arms. Clean the filters regularly and ensure dishes are loaded without overlapping. Check that spray arm holes are not blocked by food residue. Use the correct amount of detergent for your water hardness. For hard water areas, ensure the water softener salt is topped up and rinse aid is being dispensed. Run the Machine Clean cycle periodically to remove internal buildup.

How do I prevent odours in my LG washer dryer?

Leave the door and detergent drawer slightly open after each use to allow air circulation. Run the Tub Clean cycle monthly. Use the correct amount of detergent for your load size and water hardness. Wipe the door seal and glass regularly to remove moisture and residue.

Why is my LG microwave turntable not spinning?

Switch off and unplug the microwave before checking. Remove the glass turntable and roller ring, then clean any food debris from the base of the cavity. Check that the roller ring rotates freely and the turntable sits correctly on the drive coupling in the centre. Ensure food containers are not too large for the cavity, as they may obstruct rotation. If the turntable still does not rotate after cleaning and repositioning, contact a qualified technician as the motor may require attention.