LG Appliance Repair in Coleridge

What does error LE mean on an LG washing machine?

Error LE on an LG washing machine indicates the motor is overloaded or locked. Close the water tap, unplug the machine, check if the drum is overloaded, and wait 30 minutes before restarting. If the error persists, contact a specialist technician.

What does Cd mean on an LG washer dryer combo?

Cd on an LG washer dryer combo is not an error but indicates the Cool Down phase after a drying cycle. The machine tumbles periodically to prevent wrinkles. Press any button to end the cool down phase. The door can be opened approximately 2 minutes after pressing the button.

What does CL mean on an LG dishwasher?

CL on an LG dishwasher indicates the child lock or control lock is active, not an error. To deactivate, press and hold the designated buttons (typically Rinse and Spray, or Dual Zone) for 3 seconds. Button combinations vary by model; consult your user manual if needed.

What does error Er gF mean on an LG fridge freezer?

Error Er gF on an LG fridge freezer indicates a water flow sensor error or low water pressure affecting the ice maker. Check that the water supply is turned on and the water line is not kinked. If the error persists, contact a specialist technician.

What does error dE2 mean on an LG washing machine?

Error dE2 on an LG washing machine indicates the door is closed but not locking properly. Unplug the machine for 10 seconds, then reconnect. Ensure the door closes firmly and nothing is obstructing the latch. If the error persists, the door lock mechanism may need inspection by a specialist technician.

How often should I clean the lint filter on my LG tumble dryer?

Clean the lint filter after every drying cycle. A blocked lint filter reduces drying efficiency, increases energy consumption and can pose a fire hazard. Remove the filter, peel away the lint by hand or use a soft brush, and replace it securely before the next use.

How often should I replace the water filter in my LG refrigerator?

Replace the water filter every six months or when the filter indicator light illuminates. If you notice reduced water flow from the dispenser, the filter may need replacing sooner. After installing a new filter, flush approximately 2.5 gallons of water through the dispenser to remove air and any carbon residue. Use only genuine LG replacement filters to maintain water quality and appliance warranty.

Why is my LG fridge ice maker not working?

First, ensure the ice maker is switched on and the water supply is connected and turned on. Check that the freezer temperature is set to at least -18°C or colder. Allow 24 hours after installation for ice production to begin. If the ice maker arm is stuck in the raised position, gently lower it. Clear any ice blockages in the dispenser chute. Replace the water filter if it has not been changed in over six months.

Can I wash and dry in one cycle on my LG washer dryer?

Yes, LG washer dryers offer an auto wash and dry function that completes both cycles without intervention. However, the drying capacity is typically half the washing capacity. For best results when using the continuous cycle, load no more than the rated drying capacity to ensure thorough drying.

Why is my LG tumble dryer taking too long to dry clothes?

Extended drying times are usually caused by restricted airflow. Clean the lint filter before each cycle and check the heat exchanger or condenser for lint buildup. Ensure the exhaust vent hose is not kinked or blocked. Overloading the drum prevents proper air circulation; fill to approximately half capacity for best results. Check that Energy Saver mode is not enabled if faster drying is needed. In colder weather, drying times naturally increase as the dryer takes longer to warm up.