AEG Appliance Repair in Romsey

What does error code EH0 mean on an AEG washing machine?

Error code EH0 (and EH1, EH2, EH3) on an AEG washing machine indicates a power supply issue - the voltage may be too low, too high, or unstable. Unplug the appliance. Test the socket with another appliance and check your home's electrical supply is stable. Do not use extension cables. If the problem persists, contact a qualified electrician to inspect your electrical installation.

What does error code C1 mean on an AEG oven?

Error code C1 on an AEG oven indicates the telescopic shelf supports have not been removed before running pyrolytic cleaning. Remove all telescopic rails, shelves and removable side rails from the oven before running the pyrolytic function.

What does error code E70 mean on an AEG tumble dryer?

Error code E70 on an AEG tumble dryer indicates a temperature sensor fault. WARNING: This is a safety-critical issue. Do not use or attempt to restart the dryer until the problem has been professionally diagnosed. Unplug the appliance immediately and contact a qualified technician.

What does error code F6 or F7 mean on an AEG fridge freezer?

Error codes F6 or F7 on an AEG fridge freezer indicate a temperature error, which may be temporary. Keep the doors closed and allow several hours for the temperature to return to normal. If the error persists, contact a qualified technician.

What does error code E10, E11 or C1 mean on an AEG washing machine?

Error codes E10, E11 or C1 on an AEG washing machine indicate a water inlet problem - the machine is not taking in water or has not taken in enough water. Switch off the appliance and unplug it from the mains before any inspection. Check that the water tap is fully open, inspect the inlet hose for kinks or blockages, and clean the inlet hose filter. If the problem persists, contact a qualified technician.

Can I wash and dry in one continuous cycle on my AEG washer dryer?

Yes, most AEG washer dryers offer a Non-Stop programme that automatically transitions from washing to drying. However, for best results with full loads, it's recommended to wash first, remove some items to match the drying capacity, then run the drying cycle separately.

What does the 'P' message mean on my AEG hob display?

The letter 'P' indicates that the Power Boost function is activated. This function provides an instant burst of heat, boiling water in under 90 seconds.

How often should I empty the water tank on my AEG tumble dryer?

Empty the water tank after each use. The tumble dryer will automatically stop if the tank becomes full during a cycle.

Can I use the microwave and conventional oven together on my AEG combination oven?

Yes, AEG combination ovens offer combined cooking modes that use microwave energy alongside conventional heating. This significantly reduces cooking time while achieving browning and crisping. Use only oven-safe and microwave-safe cookware in combination mode.

Why is my AEG fridge making unusual noises?

Some noise is normal during operation. Humming indicates the compressor running, clicking sounds occur when the thermostat switches on and off, and gurgling is refrigerant flowing through the system. Ensure the fridge is level and not touching walls or cabinets. If rattling persists, check that items inside are not vibrating against shelves.