AEG Appliance Repair in King's Hedges

What does error code i60, i61, i69 or i6C mean on an AEG dishwasher?

Error codes i60, i61, i69 or i6C on an AEG dishwasher indicate a heating problem - the dishwasher is not heating water correctly. Switch off at the mains for 5 minutes then switch back on and test. If the error persists, contact a qualified technician.

What does error code E60 mean on an AEG tumble dryer?

Error code E60 on an AEG tumble dryer indicates a heating problem - the dryer is not heating correctly. Switch off the appliance and allow it to cool for at least 30 minutes before any inspection. Ensure the dryer has adequate ventilation, clean the fluff filter and condenser unit. If the problem persists after these checks, contact a qualified technician.

What does error code E9 mean on an AEG hob?

Error code E9 on an AEG hob indicates a potential circuit board problem. Disconnect from the mains for at least 30 seconds then reconnect. If the error persists, contact a qualified technician.

What does error code C4 mean on an AEG oven?

Error code C4 on an AEG oven indicates the Plus Steam or Steam Bake function is still activated while attempting pyrolytic cleaning. Press the Steam Bake button to deactivate it (the indicator light will turn off) before starting the pyrolytic function.

What does an F-prefix error code mean on an AEG oven?

F-prefix error codes on an AEG oven (such as F113, F908) indicate various internal faults requiring professional diagnosis. Switch off at the mains for 30 seconds then switch back on. If the error persists, note the specific code and contact a qualified technician.

Where can I find the model and serial number on my AEG appliance?

The rating plate with model (PNC) and serial number is typically located: on washing machines and dryers, inside the door frame; on dishwashers, inside the door edge; on fridges and freezers, inside on the left wall; on ovens, behind the door on the frame; on hobs, on the underside. You will need these numbers when ordering spare parts or booking repairs.

How do I use the pyrolytic cleaning function on my AEG oven?

Remove all accessories and removable shelf supports, and wipe away any excessive food residue first to prevent smoke. Ensure the door is fully closed, then select the pyrolytic cleaning programme. Choose P1 for light cleaning or P2 for stubborn dirt. Programme durations vary by model - typically P1 runs for 1 to 1.5 hours and P2 for 1.5 to 3 hours. Consult your user manual for exact timings. Ensure good ventilation in the kitchen during the cycle. The oven heats to approximately 500°C - do not touch the oven exterior as surfaces become extremely hot. The door locks automatically for safety and will not open until the cycle completes and the oven has cooled. Once cool, simply wipe away the ash residue.

How can I save energy with my AEG fridge?

Avoid putting warm food directly into the fridge, as this makes the compressor work harder and uses more energy. Don't keep the door open for extended periods while deciding what to eat.

How do I clean a regenerating carbon filter for my AEG cooker hood?

Remove the filter, clean by hand with hot water without detergent, or run it alone in the dishwasher with regular detergent. Ensure the filter is completely dry before reinstalling. Every 5-6 months, clean and then regenerate the filter by drying in the oven at approximately 200°C for 1-2 hours. Allow the filter to cool completely before handling.

How can I save energy with my AEG dishwasher?

Use the ECO programme for your dishwashing cycles. It takes longer but uses less energy because the dishwasher doesn't have to work as hard to achieve the same results.